Applicable to Mercedes CDI engines OM 611, 612, 613, 628, 646*, 647, 648 etc. (*not suitable for 646 EVO)
The injector nozzle puller with slide hammer is designed for the removal of injection nozzles which are only slightly seized in place without having to dismantle them. The injector nozzle puller with pull spindle enables the removal of very tight-fitting or stuck injector nozzles to be performed directly on the vehicle. It is not necessary to remove the cylinder head from the vehicle using either of the pullers. The cleaning tool allows the injection nozzle mounting hole, the nozzle seat, and the small aperture leading to the combustion chamber to be cleaned in a single operation. By screwing the compressed air adapter into the glow plug bore and injecting air into the combustion chamber, impurities are prevented from entering the latter.
The screw tap with drill bit is used for re cutting and cleaning the tapped hole for the nozzle holder. This procedure is important before re-installing the injector nozzle.